Part Number Hot Search : 
EFM32 TOP223P 12160 MB90F4 0512T K1005 N4340W1E ML12561
Product Description
Full Text Search
 

To Download AUIRLL014N Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  
  
   pd- 97755 www.irf.com 1 features  
            ! "  " #   $ %  $#      "     #"  &'  $ ( )% !"   # *# +, description specifically designed for automotive applications, this cellular design of hexfet? power mosfets utilizes the latest processing techniques to achieve low on- resistance per silicon area. this benefit combined with the fast switching speed and ruggedized device design that hexfet power mosfets are well known for, provides the designer with an extremely efficient and reliable device for use in automotive and a wide variety of other applications. automotive grade absolute maximum ratings stresses beyond those listed under ?absolute maximum ratings? may cause permanent damage to the device. these are stress ratings only; and functional operation of the device at these or any other condition beyond those indicated in the specifications is not implied. exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. the thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. ambient temperature (t a ) is 25c, unless otherwise specified. sot-223 AUIRLL014N     gds gate drain source s d g hexfet ? is a registered trademark of international rectifier. * qualification standards can be found at http://www.irf.com/ v (br)dss 55v r ds(on) max. 0.14 ? i d 2.0a parameter units i d @ t a = 25c continuous drain current, v gs @ 10v i d @ t a = 25c continuous drain current, v gs @ 10v  i d @ t a = 70c continuous drain current, v gs @ 10v a i dm pulsed drain current  p d @t a = 25c power dissipation (pcb mount)  p d @t a = 25c power dissipation (pcb mount) linear derating factor (pcb mount) mw/c v gs gate-to-source voltage v e as single pulse avalanche energy (thermally limited)  mj i ar avalanche current  a e ar repetitive avalanche energy  mj t j operating junction and t stg storage temperature range thermal resistance parameter typ. max. units r ? ja junction-to-ambient (pcb mount, steady state) 90 120 c/w r ? ja junction-to-ambient (pcb mount, steady state)  50 60 c w -55 to + 150 1.0 8.3 16 max. 2.8 1.6 16 2.0 2.1 0.1 32 2.0

2 www.irf.com  
           ! "     #  $ %  &  ' (&)    *  ' (+,) - ' ./
 ' ( ? ) 0  ' .1 # 2 %  i sd ? 1)  ? 314) &  ? & 
 ) *  ? (+,   5   ?? 64   !! ?? 7  8  "  " 2
9. "    !"   $""    8  "  "  ! : !"  ") $" !" "   "   ;  !  static electrical characteristics @ t j = 25c (unless otherwise specified) parameter min. typ. max. units v (br)dss drain-to-source breakdown voltage 55 ??? ??? v ? ? ? a ??? ??? 250 i gss gate-to-source forward leakage ??? ??? 100 na gate-to-source reverse leakage ??? ??? -100 dynamic electrical characteristics @ t j = 25c (unless otherwise specified) parameter min. typ. max. units q g total gate charge ??? 9.5 14 q gs gate-to-source charge ??? 1.1 1.7 nc q gd gate-to-drain ("miller") charge ??? 3.0 4.4 t d(on) turn-on delay time ??? 5.1 ??? t r rise time ??? 4.9 ??? ns t d(off) turn-off delay time ??? 14 ??? t f fall time ??? 2.9 ??? c iss input capacitance ??? 230 ??? c oss output capacitance ??? 66 ??? pf c rss reverse transfer capacitance ??? 30 ??? diode characteristics parameter min. typ. max. units i s continuous source current ??? ??? 1.3 (body diode) a i sm pulsed source current ??? ??? 16 (body diode)  v sd diode forward voltage ??? ??? 1.0 v t rr reverse recovery time ??? 41 61 ns q rr reverse recovery charge ??? 73 110 nc t on forward turn-on time intrinsic turn-on time is negligible (turn-on is dominated by ls+ld) v gs = 5.0v, i d = 1.2a  v gs = 4.0v, i d = 1.0a  v ds = 25v, i d = 1.0a i d = 2.0a v ds = 44v v gs = 16v v gs = -16v v gs = 10v, see fig. 6 and 9  v gs = 0v v ds = 25v ? = 1.0mhz, see fig. 5 di/dt = 100a/ s  conditions v gs = 0v, i d = 250 a reference to 25c, i d = 1ma v gs = 10v, i d = 2.0a  v ds = v gs , i d = 250 a v ds = 55v, v gs = 0v v ds = 44v, v gs = 0v, t j = 150c mosfet symbol v dd = 28v t j = 25c, i f = 2.0a conditions i d = 2.0a r g = 6.0 ?  showing the integral reverse p-n junction diode. conditions r d = 14 ??? ? 

www.irf.com 3   
    
        
    
 
    ! "#$%&%'    ' 
     ( )  )*  ) qualification information ? sot-223 msl1 rohs complia nt yes esd machine model class m1a (+/- 50v) ??? aec-q101-002 human body model class h0 (+/- 250v) ??? aec-q101-001 charged device model class c5 (+/- 1125v) ??? aec-q101-005 qualification level automotive (per aec-q101) ?? comments: this part number(s) passed automotive qualification. ir?s industrial and consumer qualification level is granted by extension of the higher automotive level. moisture sensitivity level

4 www.irf.com  + 
+  #
 
  , -. $ 
 /+    + 
.  #
 
0 
 + 
.  #
 
0 1 10 100 0.1 1 10 100 20 s pulse width t = 25c a j ds v , drain-to-source voltage (v) 3.0v vgs top 15v 10v 7.0v 5.5v 4.5v 4.0v 3.5v bottom 3.0v d i , drain-to-source current (a) 1 10 100 0.1 1 10 100 a ds v , drain-to-source voltage (v) d i , drain-to-source current (a) 20 s pulse width t = 150c j 3.0v vgs top 15v 10v 7.0v 5.5v 4.5v 4.0v 3.5v bottom 3.0v 1 10 100 3.0 4.0 5.0 6.0 7.0 t = 25c t = 150c j j gs v , gate-to-source voltage (v) d i , drain-to-source current (a) a v = 25v 20 s pulse width ds 0.0 0.5 1.0 1.5 2.0 -60 -40 -20 0 20 40 60 80 100 120 140 160 j t , junction temperature (c) r , drain-to-source on resistance ds(on) (normalized) v = 10v gs a i = 2.0a d

www.irf.com 5   12 .  )"   + 
3 #)/ 3 $ $2 
/  )   + 
#
 
/ 4 $ $2 
/  )  + 
2 
$4 4  5 /  ) 0 100 200 300 400 1 10 100 c, capacitance (pf) ds v , drain-to-source voltage (v) a v = 0v, f = 1mhz c = c + c , c shorted c = c c = c + c gs iss gs gd ds rss gd oss ds gd c iss c oss c rss 0 4 8 12 16 20 0 3 6 9 12 15 q , total gate charge (nc) g v , gate-to-source voltage (v) gs a for test circuit see figure 9 i = 2.0a v = 44v v = 28v d ds ds 0.1 1 10 100 0.4 0.6 0.8 1.0 1.2 1.4 1.6 t = 25c t = 150c j j v = 0v gs v , source-to-drain voltage (v) i , reverse drain current (a) sd sd a 0.1 1 10 100 1 10 100 v , drain-to-source voltage (v) ds i , drain current (a) operation in this area limited by r d ds(on) t = 25c t = 150c single pulse 10 s 100 s 1ms 10ms a a j

6 www.irf.com q g q gs q gd v g charge + - &  &  ????    ???????
 &  & 
 <* d.u.t. v ds i d i g 3ma v gs .3 ? f 50k ? .2 ? f 12v current regulator same type as d.u.t. current sampling resistors + - v ds 90% 10% v gs t d(on) t r t d(off) t f   2
 )+6*    2
 )++ #
  7
3 #)6*   3 #)+ #
   1 
*+  +
08
 $ $" %&/ 0.1 1 10 100 1000 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 t , rectangular pulse duration (sec) 1 d = 0.50 0.01 0.02 0.05 0.10 0.20 single pulse (thermal response) a thermal response (z ) thja p t 2 1 t dm notes:  1. duty factor d = t / t 2. peak t = p x z + t  12 j dm thja a 

www.irf.com 7 
 1"*
 ) /4 # 
 9
 
*6*  t p v (br)dss i as 0 20 40 60 80 25 50 75 100 125 150 j e , single pulse avalanche energy (mj) as a starting t , junction temperature (c) v = 25v i top 1.8a 3.2a bottom 4.0a dd d 
 9
 
*+ #
 r g i as 0.01 ? t p d.u.t l v ds + - v dd driver a 15v 10v

8 www.irf.com p.w. period di/dt diode recovery dv/dt ripple ? 5% body diode forward drop re-applied voltage reverse recovery current body diode forward current v gs =10v v dd i sd driver gate drive d.u.t. i sd waveform d.u.t. v ds waveform inductor curent d = p. w . period + - + + + - - - : &  ' (& $" -"! -    !  
  

    
 &  ???  !" "  
 ???      <* ??? 0  !" "     2! " == ??? <* 9  ! <  *  
,! -" ,"  " ????? -"   0! ! ???? " 5 ???? -" - > 0! ! ,  * $"   :   5 ,$# (;5+2

www.irf.com 9  
  "  "    #! %  
 note: for the most current drawing please refer to ir website at http://www.irf.com/package/

10 www.irf.com  
 !  "  "    #! % 4.10 (.161) 3.90 (.154) 1.85 (.072) 1.65 (.065) 2.05 (.080) 1.95 (.077) 12.10 (.475) 11.90 (.469) 7.10 (.279) 6.90 (.272) 1.60 (.062) 1.50 (.059) typ. 7.55 (.297) 7.45 (.294) 7.60 (.299) 7.40 (.292) 2.30 (.090) 2.10 (.083) 16.30 (.641) 15.70 (.619) 0.35 (.013) 0.25 (.010) feed direction tr 13.20 (.519) 12.80 (.504) 50.00 (1.969) min. 330.00 (13.000) max. notes : 1. controlling dimension: millimeter. 2. outline conforms to eia-481 & eia-541. 3. each o330.00 (13.00) reel contains 2,500 devices. 3 notes : 1. outline comforms to eia-418-1. 2. controlling dimension: millimeter.. 3. dimension measured @ hub. 4. includes flange distortion @ outer edge. 15.40 (.607) 11.90 (.469) 18.40 (.724) max. 14.40 (.566) 12.40 (.488) 4 4

www.irf.com 11 ordering information base part package type standard pack complete part number form quantity AUIRLL014N sot-223 tube 95 AUIRLL014N tape and reel 2500 AUIRLL014Ntr

12 www.irf.com  
  

         
                  

  
   
    
   
 
     
   

! 
" #      !   $%&  ' !     ( 
  

) !   
 
  
  

 
 "% 
  *
+ 
         
!"  !     
     !  
    

  
         
 
! +  !  ",  )  

 ) ' 
   !  "-'
 !  )        
 
 
    "       
    

 
 "       
  
    
 " ,    .    ! 
 
  
 
   )        "  
                 
  !      
    
!   
       
" 
        !        
    

"     
 
  "        *
    
 "    

!          

  '      !     
 

     
    

"      
 "  
     .  
    
      
        
   !
   


     !   *  
"/ 0 
  
  
   . 
 0       
   
             
 
   '           
  
 
     *  
! 
   . 

   !      
  
" 1 

      2 3 
%
23%  /2  2     
23%    

 ) 
     
 
 "0
!      

  23%       
 )       
  0+!        
  
!     )  

 !  
"  
         
    

 
    
  ! /1(,/45676)       
    $%&"0
!        
    
 !      
) " 5  
 
  0

+
 
" 
#    
 
 
$  
   ?    @) a  ") ,$" b.( * c #6% (93(


▲Up To Search▲   

 
Price & Availability of AUIRLL014N

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X